Use Hot Air Gun, Heat Gun / Hot Air Blower for Removal of SMD IC’s without damaging the ICs and the Boards

Dear Sir / Madam,
We represent STEINEL from Germany for their Hot Air Gun and Heat Guns useful for various applications.

Microprocessor-controlled, high-end heat gun with temperature control, LCD display and cold air stage for Removal of SMD IC’s & PTH Componets / Microprocessors of Mini Systems, Mobile Phones, CTV, LCD TV, or any other electronic Chassis is difficult using our Normal Soldering Irons. Hot Air Gun is useful to facilitate easy rework without damaging the ICs and the Boards.

Click Here to view Hot Air Gun Application

Apart from above there many other applications like:
1. Removal of SMD Components and Dualin IC's through Printed Through Hole Circuits (which otherwise would be difficult without the expensive De-soldering Stations, SMD Rework Stations).
2. Removal of small particles that get stuck in the small holes, while removing Dualin IC's through Printed through hole Circuits.
3. Removal of SMD IC's specially Micro Processor for System etc.
4. Removal of moisture on the PCB's can also be done with the Steinel Hot Air Gun.
5. Shrink Sleeving and Shrink Tubing.
6. Softening of Wires in Motors during repairs.
7. Drying of Adhesives / Filters / Activating Emulsions etc.
8. Several other applications where flameless heat is required.

Applications in Refrigerators / Washing Machines / Air-conditions

1. Alignment of Gaskets in the Refrigerators.
2. To Smoothen the Doors of the Refrigerators.
3. To Remove White Marks in HIP Blow Moulded Sheets.
4. To Remove Moisture.
5. For drying of metallic parts after washing in water jet

For more details please write to us and we will be happy to assist you.

Board: 022-26731904 / 26731052 Ext # 35 Fax: 022-26731901
Email: hamir.charania@pammvi.com
Web: http://www.pammvi.com
New Web: http://www.heatshrinkgunsindia.com/